Posted 20 hours ago

Rycal Block Paving and Concrete Sealer 20Ltr

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

It’s done a great job but obviously at that rate of coverage it works out expensive but I would certainly use again. If you want to prevent the surface from becoming slippery, we recommend mixing the treatment with silver sand or builder’s sand. If you require a even glossier finish, if further coats are applied, the paved surface will become shinier and shinier. Approximately 5m2 – 8m2 per litre as the jointing material does not need solidifying – it is generally less porous.

Ok it was a hot day but I would have needed more if i hadn’t changed from using a roller to a sprayer half way through. I applied the sealer with a brush but found that using a cheap pressure sprayer was more effective and efficient.The rollers became disposable after each application removing the chances of spills and a pretty noxious mix having to be disposed of correctly.

If you want the sanded joints between the gaps in the paving to be set solid, then work on low coverage rates for the sealer of about 2 m2 per litre. The results were more than I expected, there was a mixture of new and old patio slabs and K-Seal provided a uniform final finish to them all.In the unlikely event you receive goods that are damaged, the courier note must be signed DAMAGED for M. The preparation is key so I washed, scrubbed and prepared the drive removing all the moss, grass and other stains in preparation, then brushed over and spot cleaned the drive again prior to application today (5 days after initial prep). We are manufacturers of sealer and coatings for block paving, concrete, imprinted concrete, natural stone and tarmac.

Water based block paving sealers are the perfect choice if you don’t want to apply a solvent based product.If the pavers have a sanded joint you should liberally apply the sealer into the sand to solidify it. Depending on the porisity of the blocks, a primer coat may need to be applied, this would allow the smaller pores in the blocks to be filled prior to application of neat sealant. This is a rough estimate and varies depending on the condition of the driveway and amount applied with each coat. Solvent No2 is a versatile solvent thinner which can be used for thinning a variety of oil based paints, coatings and sealers. Some sealants may impart a glossy, wet look that isn’t always to everyone’s taste and some products may not be suitable for your particular type of paving.

The sealer will be tack free within 2 hours at 20°C and foot traffic may be permitted after 4 hours. We are more than happy to share our extensive practical and technical knowledge and expertise with you.K-Seal Total resin block paving sealer provides excellent surface protection for both driveways and patios. QUICK DRYING TIME – Apply a second coat after a minimum of three hours and a maximum of twenty-four hours.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment